EBEPLAN Industrial Equipment Ltd.

The HydroSlide flow regulator provides appropriate solution for discharging water from pool parts, sewer sections and from other stormwater discharge faculties. The discharge regulator designed for given flow rate ensures that the water quantity discharged is almost constant (± 5 %). No electric power is necessary for its operation, the varying of cross section is accomplished by the closing plate working with float, which is powered by the hydraulic effect of water.
The designing of discharge controlling equipment takes place according to the quantity of passing water and the maximum level of water in the shaft. Its material could be corrosion resistant steel (1.4301) or acid resistant steel (1.4571). It can be installed at the semi-dry or at the wet side.
The discharge regulators are available in versions having blockage clearing devices. In case of this design the closing plate opens the entire cross section, thus preventing blockage. The operation of closing plate is automatic, although it is possible to open it manually also.
The many advantages of the use of discharge controllers are introduced in the detailed descriptions.

The vortex discharge regulator can be a solution for reducing the water flow of stormwater outlets and stormwater reservoirs. In this kind of equipment the chocking happens as a result of the produced vortex flow. The vortex causes a high flow resistance, therefore, it reduced the water delivery.
The vortex discharge regulator does not contain moving parts, so it requires no electrical power either. It can be used in case of rainwater, as well as for waste water, it can be deployed in wet, dry and semi-dry spaces.
By the use of vortex discharge regulator the water flow can be limited at stormwater reservoirs and barrage facilities, and a consistent load can be ensured for wastewater treatment plants, pumping stations, as well as for oil and grease traps.
The equipment can be made from stainless steel (1.4301) or acid resistance steel (1.4571) as required. Its installation is simple, quick and can be implemented also as retrofitting. No modification of the facility is required for the installation.